Audio Technica PRO35 clip on sax mic

Code: BC0198
£225.00
£187.50
Click here to review this product
  • 2 In Stock
Quantity - +
Add to basket

Giftwrapping

Would you like us to wrap this gift?

Would you like a gift tag on this gift? No Yes (adds £0.50 per item)

Gift tag message: We reserve the right to exclude any part of the message that is deemed to be offensive

Add to basket

Designed for sax, toms, brass and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

UniMount® clip permits accurate positioning, provides shock resistance and protects element


Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source


Extended frequency response captures subtle nuances of the performance


6' (1.8 m) cable permanently attached to microphone


Please note- this microphone requires 'phantom power' to function. Though this is standard to the vast majority of modern amps and sound desks it is advisable to check before ordering

ELEMENT: Fixed-charge back plate, permanently polarized condenser


POLAR PATTERN: Cardioid


FREQUENCY RESPONSE: 50-15,000 Hz


LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave

OPEN CIRCUIT SENSITIVITY: -45 dB (5.6 mV) re 1V at 1 Pa


IMPEDANCE: 250 ohms


MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.


DYNAMIC RANGE: (typical) 115 dB, 1 kHz at Max SPL


SIGNAL-TO-NOISE RATIO: 64 dB, 1 kHz at 1 Pa


PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical


SWITCH: Flat, roll-off


WEIGHT: (MICROPHONE) 0.3 oz (8 g)


WEIGHT: (POWER MODULE) 2.9 oz (81 g)


DIMENSIONS: (MICROPHONE) 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter


DIMENSIONS: (POWER MODULE) 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter


OUTPUT CONNECTOR: (POWER MODULE) Integral 3-pin XLRM-type


CABLE: 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector


ACCESSORIES FURNISHED: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch


AUDIO-TECHNICA CASE: STYLE M12


Read More

Reviews

There are no reviews for this product yet. Write a review