Sax microphones, wireless systems & reflectors

New C519ML clip on sax microphone with improved clamp and detachable cable which plugs into.......... PT40 Pro Miniature transmitter with belt clip which sends the signal to......... SR40 Flexx UHF Receiver.

If you have an Akai EWI wind synth or anything else with a jack socket the GB40 bug is probably the the easiest way to make it wireless.

The GB40 transmits to the SR40 single channel receiver. When ordering you can choose from 7 different frequencies to ensure you do not clash with other wireless systems in the band.

Freedom! - complete sax radio mic system. 3 channels (non-switchable) are available just in case there are others around you using wireless systems so find out what channel they are using before you order. The transmitter takes a 9v battery which will last around 8 hours. The transmitter has a belt clip which you can use to clip it on to the keyguard of your sax (see photo). Jack socket output (short lead included).

Complete with PRO35 clip on sax microphone.

Freedom! - complete sax radio mic system. 3 channels (non-switchable) are available just in case there are others around you using wireless systems so find out what channel they are using before you order. The transmitter takes a 9v battery which will last around 8 hours. The transmitter has a belt clip which you can use to clip it on to the keyguard of your sax (see photo). Jack socket output (short lead included).

Complete with top of the range ATM350 clip on sax microphone.

Freedom! - complete sax radio mic system. UHF and true diversity which means it's great quality and very reliable. 10 switchable channels just in case there are others around you using wireless systems. The transmiiter takes two AA batteries which will last 8-12 hours. Mute switch to turn the mic off. The transmitter has a belt clip which you can use to clip it on to the keyguard of your sax (see photo).

Complete with PRO35 clip on sax microphone.

You will need a standard XLR or jack lead to connect the receiver to your PA mixer.

Freedom! - complete sax radio mic system. UHF and true diversity which means it's great quality and very reliable. 10 switchable channels just in case there are others around you using wireless systems. The transmiiter takes two AA batteries which will last 8-12 hours. Mute switch to turn the mic off. The transmitter has a belt clip which you can use to clip it on to the keyguard of your sax (see photo).

Complete with top of the range ATM350 clip on sax microphone.

You will need a standard XLR or jack lead to connect the receiver to your PA mixer.

Designed for sax, toms, brass and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance.

Frequency response 50-15,000 Hz

Supplied with preamp so all you need is a standard XLR microphone lead to plug into any mixer with phantom power, which most mixer/amps have.

Supplied with Audio-Technica’s versatile UniMount® clip, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.

Frequency response 40-20,000 Hz

Supplied with preamp so all you need is a standard XLR microphone lead to plug into any mixer with phantom power, which most mixer/amps have.

Top quality American made specialist microphones endorsed by Michael Brecker, Dave Liebman, Marcus Miller, Sonny Rollins & many others.

The System 1 is a low profile condenser microphone that attaches to the bell of any flanged bell instrument such as woodwind and brass, with a LOW MASS clip. It can also clamp to many other instruments using the AMT "Universal Clamp".

The Roam 1 Elite - Thanks to the special request of Michael Brecker, Dave Liebman, Tom Scott, and Joe Lovano AMT brings you the Roam 1 Elite.

High sound quality and incredibly simple to use with the Samson wireless transmitter attached to the clamp. No messy wires or belt pack - just clip it on the bell and off you go!

For hardwire applications, with standard XLR mic lead (not included). Use this model to connect to your mixer/amplifier with a standard XLR mic lead. Check your mixer has phantom powering, otherwise you will need a B29 battery power pack

Conventional dynamic mic with clip to fit on normal mic stand. Recommended for saxophone and made by Shure, one of the world's leading manufacturers.

The world's most popular general purpose vocal microphone, and it's very good for sax aswell! If you want one mic to cover you for most applications then the SM58 is the one that has set the standard for 30 years.

Conventional dynamic mic with clip to fit on normal mic stand. Made by Shure, one of the world's leading manufacturers.

Acoustic monitor for saxophone as used by leading professionals. Hear yourself better in any situation. Improve intonation and tone quality. Variable angle control. Attaches easily to most microphones. Stops annoying microphone feedback. Cloth storage bag included.

6 metres long, noiseless, low capacity with Neutrik connectors.

6 metres long, noiseless, low capacity with Neutrik connectors.